Technical Data; Emissions; Vibration Specifications - Mafell Rf 34-18 Originalbetriebsanleitung

2.4 Technical data

Type of motor
Operating voltage
Speed during idling
Cutter diameter
Milling width
Cutting depth
Weight without rechargeable battery
Dimensions (W x L x H)

2.5 Emissions

The declared noise emission values have been measured in accordance with EN 62841-1 and may be used for
comparing the tool with another and also in a preliminary assessment of exposure.
2.5.1 Noise emission specifications
Noise emission values determined according to EN 62841:
Sound pressure level
Uncertainty
Sound power level
Uncertainty
The noise measurement was done without tool at idling speed.
2.5.2

Vibration specifications

The typical hand-arm vibration is less than 2.1 m/s
Protect rechargeable battery packs from fire!
There is danger of explosion!
Cordless Alliance System (=CAS) is a cross-manufacturer battery pack system.
Further information is available at www.cordless-alliance-system.com
Danger
The noise emissions during actual use of the power tool can differ from the declared
values depending on the ways in which the tool is used especially what kind of
workpiece is processed.
Always wear hearing protection, even when the power tool ist running idle in addition
to the trigger time!
brushless
18 V DC
10000 min
100 mm (3.94 inches)
34 mm (1.34 inches)
6 / 8 / 10 mm (0.24 / 0.31 / 0.39 inches)
3.2 kg (7.05 lbs)
150 x 350 x 180 mm (5.91 x 13.78 x 7.09
inches)
L = 95 dB (A)
PA
K = 3 dB (A)
PA
L = 103 dB (A)
WA
K = 3 dB (A)
WA
2 .
-20-
-1