Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ENGLISH
NOTE: the indicator light on the large cup will flash slowly, while the power indicator light and
the indicator light on the small cup will remain steady.
WARNING: do not lift the handle while the coffee is brewing to avoid possible injury. Lift the
handle only when all indicator lights are on.
Using the adapters
Ground coffee
1.
Select the one or two cups filter and fill it with ground coffee.
2.
Press the ground coffee using the pressing spoon. Do not overfill the filter. This could
cause a blockage or overflow.
WARNING: the maximum amount of ground coffee for a one-cup filter is 7 grams. The maximum
amount of ground coffee for a two-cup filter is 14 grams.
3.
Place the filter with the ground coffee in the adapter. To do this, align the slot on the filter
with the slot on the bottom left of the adapter. Then, turn the filter clockwise.
ATTENTION: if the filter is correctly fitted, you should be able to rotate the adapter without it
falling out.
4.
Close the adapter cover.
Single-serve filter with the ground coffee adapter
1.
Place the ESE single-serve pod in the corresponding filter.
2.
Place the filled filter into the adapter. To do this, align the slot on the filter with the slot on
the bottom left of the adapter. Then, turn the filter clockwise.
ATTENTION: if the filter is correctly fitted, you should be able to rotate the adapter without it
falling out.
3.
Close the adapter cover.
Nespresso/Dolce Gusto/Senseo pods
1.
Open the adapter cover, insert the pod into the compartment and press it in by hand to
ensure that it has been punctured.
2.
Close the adapter cover.
Adjusting the amount of dispensed coffee
1.
Press and hold the large cup button for more than 1.5 seconds to enter the setting mode.
40
FREESTYLE COMPACT DARK
Werbung
