1. PARTS AND COMPONENTS
Fig. 1
1.
Buttons
2.
Cup tray
3.
Drip tray
4.
ESE single-serve pod filter
5.
One cup filter
6.
Two cups filter
7.
Ground coffee adapter
8.
Dolce Gusto pods adapter
9.
Nespresso pods adapter
10.
Senseo pods adapter
11.
Pressing spoon
12.
Water tank cover
13.
Water tank
NOTE:
The graphics in this manual are schematic representations and may not exactly match the
device.
2. BEFORE USE
-
This appliance is packaged in a way as to protect it during transport. Take the appliance
out of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent damage to the appliance
when transporting it in the future. In case the original packaging is disposed of, make sure
all packaging materials are recycled accordingly.
-
Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
Preparing to use the coffee machine for the first time
1.
Place the coffee machine on a flat, heat-resistant surface.
2.
Unlock the machine by lifting the handle. Place one of the adapters at the front of the
appliance and push it in until the front panels are aligned. Lock the coffee machine by
lowering the handle.
3.
Fill the water tank with drinking water at room temperature. Respect the indicated limit.
You can also remove the water tank from the appliance and fill it with water.
ENGLISH
FREESTYLE COMPACT DARK
37