VEVOR HC-210 Benutzerhandbuch Seite 7

Diagnosis and repair of faults
1. Chainsaw often breaks
Reason: a. The band saw is of poor quality b. The band saw is too tight c.
Overpush or improper use, It is not direct push.
Repair: a. Use a good band saw. b. Adjust the band saw properly and adjust the
handle make sure the band saw is not too tight. This is because the side of the
saw blade presses the looseness of the saw blade with the force of rebound.
2. Departure with band saw
Reason: a. band saw is too loose. b something attached to the pulley. c. Improper
use Repair: a. Adjust the handle of the band saw properly so that it does not
loosen too easily. b. Remove the thing attached to the pulley. c. Use correctly.
3. Other malfunctions
Consult the agent, and please do not repair it by yourself. During the warranty
period, the company is not responsible for the warranty of motor losses caused by
improper operation, such as(water intake, lack of phase)
- 5 -