VEVOR HC-210 Benutzerhandbuch Seite 6

overheating, please stop working immediately and unplug the power.
23. Once part of the product is on fire, do not directly use water to extinguish the
fire. Use a wet cloth to cover the fire site.
24. Please store the plastic bags and not allow children to play with them to
prevent a risk of suffocation.
25. It is prohibited to put the main body of the machine and the power cord into
any liquid.
26. DO NOT open the case door; the hands are strictly forbidden from touching
the saw blade while the machine operates.
SAVE THESE INSTRUCTIONS
Method of Application
1. Move the guide block to the correct height according to the size, then fix it.
2. Adjust the thickness adjustment plate according to the required meat size.
3. Press the green button on the power switch. Do not push the sawed item too
much during the operation. This will cause the saw bar to fall off or be damaged.
4. The operator should stand before the machine and push the product
horizontally and straight.
5. The serrate should be exposed outside the wheel when replacing the saw
blade.
6. The side of the saw blade presses the looseness of the saw blade with the
force of rebound.
7. Turn the upper wheel with your hand. Run the saw blade in and adjust the
screw counterclockwise. Run the saw blade out and change the screw clockwise.
Cleaning
The machine must be cleaned up after completion because the meat residue and
foam attached to the body will not be hygienic for a long time. The next time you
use it, the noise increases, and the saw blade is easily damaged.
- 4 -