laufen CLEANET PRO Bedienungsanleitung Seite 6

2 INTRODUCTION
LINKING THE REMOTE CONTROL
2.5
If needed, a remote control link process can be carried out. Power on the product and wait 15
seconds. Simultaneously press rear shower and rotary button for 3 seconds with the remote
control within 10cm of the product. The setup will complete within 60 seconds. When the
self-test process ends, 2 "beeps" are heard indicating that the remote has been linked
correctly to the shower toilet, if the setting is not complete in 60 seconds, repeat the process.
3 s.
1 2
Do not disconnect the appliance during the process.
6