laufen CLEANET PRO Bedienungsanleitung Seite 14

4 OPERATING THE SHOWER TOILET
4.6 SILENT MODE
Press and hold seat heater button for 3 sec to toggle silent mode ON or OFF.
Silent mode ON: LED display will flash a green light and double "beep" signal.
Silent mode OFF: LED display will flash blue light and long "beep" signal.
DEFAULT SETTINGS
4.7
Reset function will recover the default factory settings to the product.
Simultaneously press user button and rotary button for 3 sec to reset the de-
fault settings, or alternatively press 10 sec on the rotary button on the product.
Rear shower pressure
Lady shower pressure
Rear shower water temperature
Lady shower water temperature
Dryer temperature
Dryer pressure
Nozzle position
In case of power failure product will remember last time settings.
5 AUXILIARY CONTROL OF ROTARY
REAR SHOWER
5.1
To activate rear wash, press 0,5sec (1 beep) the rotary control button and
release.
×0.5sec
LADY SHOWER
To activate lady wash, press 2sec (2 beeps) the rotary control button and
release.
×2sec
WATER VOLUME ADJUSTMENT
5.1.1
While you are using the rear shower or lady shower functions, turn the rotary
control button clockwise and counterclockwise for setting the water flow.
For each position, forward or back, a beep will be heard (if silent mode is not
activated). When maximum or minimum position is reached a double beep will
be heard.
Level 3 Seat temperature
Level 3 Auto dryer
Level 3 Pulsating
Level 3 Oscillating
Level 3 Night light scheduling
Level 3 Silent mode
Level 3
14
Off
Off
Off
Off
Off
Off