laufen CLEANET PRO Bedienungsanleitung Seite 4

1 SAFETY AND WARNING NOTICES
To confirm that the installation is correct:
Check that the ceramic is installed according to the provided installation manual.
Check that the shut-off valve is open.
Check that the power supply is connected to the SIT.
When the SIT is connected to the power supply, the lights will flash and a beep will be heard.
The nozzle moves outwards and inwards.
The lights switch off and the SIT remains in a stand-by mode, ready to be used.
PRECAUTIONS FOR USE
These precautions are important for safe use. Make sure you follow them and use the product
correctly.
The SIT is a WC that has been designed for the cleaning of the anal and perineal areas. It has been
designed mainly for private use. Its use is restricted to enclosed spaces. Any other use will not be
deemed in accordance with its purpose and Laufen will not accept any responsibility for the
consequences that might arise from improper use.
Should there be an operational failure, check for Troubleshooting advice (see section 7).
To lean back when you are sitting on the SIT will facilitate the adjustment of the nozzle and will
reduce possible splashing.
Do not urinate or splash water or cleaning agents on the main body or the mains plug.
If you do it, you may cause a fire, electric shock, heat or a short-circuit and you may cause stains or
a malfunction.
Do not ever obstruct any opening in the product, nor should you drop or insert any objects in them.
Keep the air inlet free of lint.
Do not place any open flames, candles, cigarretes or similar items over the product and do not drop
flammable items or cigarettes near or inside the product.
Do not step on the product.
Avoid forcing the seat or the cover.
Please do not bend, pull or twist the power cable, nor should you place heavy objects on it.
Do not leave towels or tissues on the heated seat. This could affect its thermal behaviour.
If there is a water leak, always close the shut-off valve.
Do not use a booster seat for children or adults if you are going to use the SIT.
To avoid dropping the remote control, store it securely when not using.
MAINTENANCE PRECAUTIONS
Turn the product off if it is not being used for a long period of time (more than 7 days).
Do not disassemble or repair the product; please contact Technical Assistance in case of
breakdown. Any repairs should be carried out by authorised staff, using original spare parts and
accessories.
When using cleaning agents on the WC, make sure it is removed within 3 minutes with the seat and
cover left open for drying.
Clean any remains of detergent from the WC bowl. (If the vapour from a WC cleanser enters the
main unit, it may cause a malfunction).
All the plastic elements should be wiped with just clean water and no chemicals should be applied
directly on the plastic components.
ENVIRONMENTAL CONDITIONS
The room temperature should not be below 4ºC or over 40ºC.
When the room temperature drops below 4ºC, avoid damages due to freezing; frozen water pipes
could break the SIT and the pipes, resulting in a water leak. Regulate the room temperature to
prevent the pipes and hoses from freezing during the cold months.
4