laufen CLEANET PRO Bedienungsanleitung Seite 15

5 AUXILIARY CONTROL OF ROTARY
5.1.2 NOZZLE POSITION ADJUSTMENT
While you are using front shower or rear shower functions, press and turn the
rotary control button clockwise to move the shower jet forwards.
Press and turn the rotary control button anti-clockwise simultaneously to
move the shower jet back.
For each position clockwise or anti-clockwise, a beep will be heard. (if silent
mode is not activated).
When maximum or minimum position is reached a double beep will be heard.
STOP CLEANING FUNCTION
5.1.3
To stop wash function, press the rotary control button during shower.
×1
DRY ACTIVATION
5.2
To activate dryer, double press the rotary control button .
The drying function will stop automatically after 5 minutes. This time can be
×2
configured through the Laufen Connect APP.
The drying function can be configured to activate automatically after the
washing time through the Laufen Connect APP
DRY AIR SPEED
5.2.1
While dryer function is used, turn the rotary control button forwards to
increase the air speed, turn the rotary control button back to decrease the air
speed.
When maximum or minimum position is reached a double beep will be heard.
SYSTEM OFF
5.3
To turn off the system, press 5sec (3 beeps) the rotary control button and
release.
To activate unit and change to System ON, press rotary control again for 2
5sec
seconds.
RESET VALUES TO FACTORY DEFAULT
5.4
To reset the values to factory default, press 10 seconds the rotary control
button and release.
10sec
15