TechniSat DIGITRADIO 760 CD IR Bedienungsanleitung Seite 146

20.9 Initial setup wizard
> Select MENU > [System settings] > [Setup wizard] and press OK to configure
the initial setup again. For more information, see "Initial setup" on page 24.
20.10 SW version
If you want to display which software is installed in the device, proceed as follows:
> Select MENU> [System settings]> [Info] and press OK.
The currently installed Sokware version is displayed until you exit the menu
again.
20.11 Data protection
> Select MENU> [System settings]> [Privacy] and press
OK to display the data protection information.
20.12 Adjusting the display brightness
You can set the display brightness for both operation and standby.
> Select MENU > [System settings] > [Lighting] and press
OK.
> Select [Operation] or [Standby] to make the setting for operation or standby
mode.
> You can now set the brightness in three steps from High, Medium to Low.
> Confirm the selection with OK.
> Select Auto-Dimm if the display is to be dimmed during operation.
45