Werbung
Verfügbare Sprachen
Verfügbare Sprachen
20.3.5
Delete network profile
Use the menu items [Delete network profile ] or [Reset settings] to delete an
existing connection to a WLAN network or all configured networks and to delete
the settings made. If you want to reconnect the device to this network, you must
make all the settings again.
20.3.6
WLAN connection in standby
>
Under [Allow WLAN connection in standby], select whether the WLAN
connection should also be maintained in standby mode [YES] or not [NO].
Please note that this function must remain switched on for unrestricted and
smooth operation and control via the TechniSat CONNECT app. However,
this also increases the power consumption in standby mode.
The TechniSat CONNECT app can be downloaded from the app stores
of your smartphone.
20.4 Time settings
>
Select MENU> [System settings]> [Time/date] and press
OK.
>
Select [Set time/date] to set the time and date manually.
Use the buttons◀ or▶ to a value. Use the buttons▲ or
▼ change it.
>
Confirm by pressing OK.
>
Select [Time update] to specify whether the time should be updated
automatically via DAB+, FM or Internet or whether you want to enter it manually.
>
To do this, select [Update from DAB+], [Update from FM], [Update
from NET] or [No update].
>
Under the [Set format] option, you can activate the 12 or 24 hour format.
Confirm your selection with the OK button.
>
Under [Standby clock], you can select the display format of the
standby clock.
Only when updating NET:
>
Under [Set time zone], select the current time zone in which you are located.
>
Under [Daylight saving time], you can specify whether daylight saving time
should currently be active.
43
Werbung
