Weidmuller u-view UV66-ADV-7-CAP-W-V2 Bedienungsanleitung Seite 51

7.2 Configuring Ethernet interfaces with static
IP address
Figure 7.2 Configuration with static IP address
► Select the desired Ethernet interface.
► Tap Config.
► Enter the IP address, the subnet mask, the gateway and the DNS server.
The IP address and the subnet mask are required.
► Tap Apply to save the settings.
A dialogue box confirms the successful configuration.
► Tap Close.
After successful addressing of the device, the values are displayed.
Operating instructions – u-view web panels 51