Miele HS16 Gebrauchsanweisung Seite 33

objects and do not brush the fine dust filter. After clean-
ing, leave the fine dust filter to dry for a minimum of
24 hours before placing it back in the fine dust con-
tainer.
– Pre-filter / filter frame: rinse under running cold water.
Do not use washing-up liquid. Do not use any sharp or
pointed objects. Dry thoroughly after cleaning.
Correct use

Do not use the vacuum cleaner without the dust con-
tainer, pre-filter, fine dust container and fine dust filter fit-
ted.

Do not vacuum up anything which has been burning or
is still glowing e.g. cigarettes, ashes or coal, whether glow-
ing or apparently extinguished.

Do not use the vacuum cleaner to vacuum up any water,
liquid or damp dirt. Wait until any freshly cleaned or sham-
pooed rugs or carpets are completely dry before attempt-
ing to vacuum.

Do not use the vacuum cleaner to vacuum toner dust.
Toner, such as that used in printers and photocopiers, can
conduct electricity.

Do not vacuum up any inflammable or combustible li-
quids or gases and do not vacuum in areas where such
substances are stored.

Do not vacuum at head height and do not let the suction
get anywhere near a person's head.
en - Warning and Safety instructions
33