Technical Data - Cleanmaxx Mc632 Gebrauchsanleitung

Cordless hand & floor vacuum cleaner
5. Place the filter compartment cover on
and twist it clockwise to secure it.
Cleaning the Motor Unit,
Extension Tube and Nozzles
• Wipe down the motor unit (4), the
extension tube (5) and the nozzles (1,
2, 6) with a damp cloth if necessary.
Then wipe them dry.
• Remove hair and fluff from the nozzles
and brushes.
• To make it easier to clean, the brush can
be removed from the floor nozzle (6)
(Picture E):
1. Turn over the floor nozzle so that
the bottom is pointing upwards.
2. On the side there is a latch next to
the small wheel. Press the latch in de
direction of the arrow (Picture E: 1.)
and flip up the latch (Picture E: 2.).

TECHNICAL DATA

Article number:
ID of the operating instructions:
Device
Model number:
Voltage supply:
Power:
Battery charge time:
Battery operating time:
Power supply
Input:
Output:
Protection class:
14576_14864_14866_15673_Inlay_DE-EN_A5_V2.indb 15 14576_14864_14866_15673_Inlay_DE-EN_A5_V2.indb 15
3. Take out the brush and remove any
dirt and contamination.
4. Reinsert the brush. When you do
this, insert the end with the star­
shaped recess first. Then press the
other end into the holder until it
engages.
5. Flip down the latch. It must engage.
Storage
• Store the device and accessories in a
cool, dry place which is protected from
direct sunlight and is out of the reach
of children and animals.
• Hang the motor unit (4) with the suction
opening (20) facing downwards into the
wall mounting bracket (3) (Picture F).
L
To prevent a deep discharge of the
battery, charge it up every 3 months
if it is not used for a prolonged
period.
14576 (black / blue); 14864 (black / silver);
14866 (black / green); 15673 (red)
Z 14576_14864_14866_15673 M DS V2 0125 as
MC632
22.2 V DC (Li­ion battery; 2 000 mAh)
140 W max.
4 – 5 hours
approx. 20 – 45 minutes (with fully charged battery;
depending on the suction level)
100 – 240 V~ 50 / 60 Hz; 0.4 A Max.
26,5 V DC, 0,5 A
II
EN
15
06.01.2025 12:09:53 06.01.2025 12:09:53