Ispring RCCP Serie Bedienungsanleitung Seite 27

Pressurized Holding Tank (#T32M): 3.2-gallon tank pre-pressurized at 7-10 psi, delivering
water when the faucet is opened.
PSI: Pounds per Square Inch, used for measuring water pressure.
Quick Connect Fitting: A secure
disconnection of tubing, sealed by an O-ring and locked in place with a blue clip.
RO Membrane (#MC7/#MC1): 4th stage thin- lm composite membrane with 0.0001-micron
ltration for high rejection rates, essential for RO.
Sediment Filter (#FP15): 1st stage, 5-micron polypropylene lter for sediment, rust, and
other particles.
Stage 1, 2, and 3 Housing O-Rings (#ORF): 3 5/8" O.D. O-rings creating seals between the
lter housings and their caps.
Stage 1 See-Through Filter Housing (#HC12): Transparent housing for the sediment lter,
allowing visual inspection.
Stage 2 GAC Filter Housing (#HW12): Solid housing for the 2nd stage GAC lter.
Stage 3 CTO Filter Housing (#HW12): Solid housing for the 3rd stage CTO lter.
T Fitting on Stage 5 Post Carbon Filter (#7544K): T tting on the right side of the 5th stage
lter.
Tank Valve (#ABV2K): Valve on the top of the tank that controls water ow.
TDS: Total Dissolved Solids, indicates water contamination level.
TDS Meter (#TDS3): Handheld meter for measuring water quality.
Transformer for Booster Pump (#ATRF5): Power supply for the PMP5 booster pump.
Tubing (#T14B/#T14W): 1/4" food-grade tubing used throughout the system.
UV Replacement Bulb (#UVB11): Replacement bulb for the UV lter.
UV Transformer/Ballast (#UVT11A/UVT11B): Power supply for the UV lter, activating only
when water ows.
tting type that enables quick connection and
27