Step 8: Installing The Leak Stop Valve; Step 9: Mounting The System (Optional) - Ispring Rccp Serie Bedienungsanleitung

Step 8: Installing the Leak Stop Valve

The Leak Stop Valve is a reusable mechanical leakage protector. Whenever it detects a leak,
it shuts down the feed water.
Step 8. a.
Make sure the end of the tubing is cut square before connecting it to the tting.
Step 8. b.
Follow the water ow direction indicated on the Leak Stop Valve to connect it to
the water inlet pipeline.
Step 8. c. Tape the bottom of the Leak Stop Valve against the oor.
Pure Water
Outlet
Any Water Filtration
System
Note: Pad is for ONE TIME USE only.
In case of any leak incidence and the pad is expanded, please shut o incoming
water supply completely, x the leak, and replace the expanded pad before
turning the water supply back on.

Step 9: Mounting the System (Optional)

If you plan to mount/hang the system, we recommend including support beneath three
housings. Supports under the housings will remove water weight from the housing threads
Water Inlet
OUT IN
ALS1
Water out Water in
RO system Feed Water Adapter
OUT IN
Water Flow Direction
Tape the bottom
against the oor
Pad
17