When To Change The Lter; How Do I Change The Lters; O-Ring Replacement; Tank Maintenance - Ispring Rccp Serie Bedienungsanleitung

When to change the lters?
We suggest replacing the lters when they reach their recommended replacement cycle.
However, the actual lifespan of lters may vary depending on the source water quality and
daily usage. If you notice a remarkable decrease in the water ow or detect an unpleasant
smell, taste, or odor, and your lter is close to the end of its replacement lifespan, changing
your lters would help.

How do I change the lters?

Carefully follow the instructions that come with the lter package.
O-rings: Replace every 3 years or if any leakage occur.
The package includes spare O-rings for the pre- lter and membrane housings. Please keep
them with this manual.

Tank Maintenance

Emptying and re lling the tank at least once a month is recommended to keep the water
inside the tank fresh and prevent it from sitting for an extended period.

What should I do with the system when I am not home?

When leaving for an extended time, you will want to turn o the water supply to the system
and empty the tank. To do this, close the knob on the feed water adapter, and open the
drinking faucet until it stops running. This will signify that the tank is empty. If you expect to
be gone for over a week, you will want to remove the RO membrane, wrap it with plastic
wrap, and store it in a Ziploc bag in the refrigerator.
If the system has not been used for over a week and lters are not sealed and stored, lters will
sit in stagnant water, allowing bacteria to accumulate. We recommend replacing the lters
under this circumstance.

Leak Stop Valve Pads (Model #ALS1P3) Replacement

We recommend watching our video "Absorb Pad Replacement of iSpring Leak Stop Valve |
Easy DIY | Step by Step" on YouTube for your reference.
OUT IN
1
Shuto the inlet water supply.
Lift the pad cover, remove the
expanded pad.
22
OUT IN
2
Drop in the new pad.
OUT IN
3
Close the pad cover, the
replacement is now completed.