Touratech 01-040-1301 Montageanleitung Seite 5

01-040-1301/1311
Note: The left side support must be installed complete
Left Side:
1) Remove the 3 hex bolts holding the footpeg mount; it is n
(With the 3 bolts removed, the footpeg mount will hang dow
2) Remove the large hex bolt fixing the subframe to the rea
head-do not confuse this bolt with the swingarm pivot pin w
12mm head w/ a 30mm locking nut.
3) Place a spacer in the recess that previously contained th
the recess. 2 different lenght spacers are included in the kit
4) With the correct spacer in position, install the TOURAT EC
(with the 8mm socket head) through the TT support and spa
5) Position the footpeg mount so that the holes line up with
original washers on the new supplied bolts. Note: the rear h
receive the 8x50
NEW
TOURATECH
Montageanleitung
Instruzioni
bolts.
IDEAS FOR MOTORBIKES
I Mounting
de montaggio
-O Hard-Part
instru
I
GV Ge