EuroLite TMH-XB-230 Bedienungsanleitung Seite 41

"LampStat"
"LampOff"
"Return"
"LightMod"
"Fan1Stat"
"Fan2Stat"
"WorkCoun"
"InfoCheck "
"SpareCon"
"WorkHour"
"SpareTim "
"DisVersi "
"Return "
"Pan"
"Pan Fine"
"Til"
"Til Fine"
"Color"
"Chan1Ctl "
"Shutter"
"Dimmer"
"Static GB"
"Prism"
"PrismRot"
Lamp status
With this function, you can
"Off"
display the status of the lamp.
OFF - the lamp is not switched
on
"On"
ON - the lamp is switched on
Lamp off if no signal
With this function you can select
to switch the lamp off
"10M"
automatically if there is no DMX
signal or no operation via the
control board for 10 minutes.
Lamp status when power off
With this function you can save
"Ligh" the current lamp status when the
device is turned off for identical
use when next turned on.
▲
Return to the main menu
Model type
This function displays the
Xxxxxxxxxxx
classification/type designation of
the device.
Error message Fan 1
Righ/Eror This function displays if fan 1
runs without error.
Error message Fan 2
Righ/Eror This function displays if fan 2
runs without error.
Counter power on
With this function you can
0000-9999
display how often the device
was turned on.
Most
Function not assigned
Total run time
With this function you can
display the running time of the
0000-9999
device. The display shows
"XXXX", "X" stands for the
number of hours.
Most
Function not assigned
Software version
With this function you can
V006
display the software version of
the device.
▲
Return to the main menu
Test function
0-255 With this function, you can test
the respective channels.
41/44 00093837.DOC, Version 1.5