Loading The Racks; Lower Rack; Cutlery Basket; Upper Rack - Indesit DI 623 Bedienungsanleitung

Loading the racks

Before loading the rack, remove all food residue from the
EN
crockery, leave saucepans and frying pans with burnt-on
residue to soak and empty all remaining liquid from cups and
glasses. After loading the appliance, check that the sprayer
arms can rotate freely.

Lower rack

The lower rack can hold pans, lids, plates, salad bowls,
cutlery, etc. as seen in the Loading examples.
Plates and large covers should be placed at the sides of the
rack, ensuring that they do not block the rotation of the upper
sprayer arm.
Some dishwasher models are fitted with tip-up sections
which can be used in a vertical position when arranging plates
or in a horizontal position when arranging pans and salad
bowls.

Cutlery basket

The type of cutlery basket may vary according to the
dishwasher model.
Knives and other utensils with sharp edges must be
placed in the cutlery basket with the points facing downwards,
or they must be positioned horizontally in the tip-up
compartments on the upper rack.
To divide the central basket
the handle. The two detachable side compartments* may be
hooked onto the upper or lower rack.
The two grids* may be positioned in the basket to separate
the cutlery: place the pieces of cutlery into the appropriate
compartments with the handles at the bottom.

Upper rack

Load this rack with delicate and lightweight crockery: glasses,
tea and coffee cups, saucers, small salad bowls, saucepans
and small saucepans that are not too soiled, using the Loading
examples as a guide.
• Lightweight crockery: position these dishes so that they
will not be moved by the jets of water.
• Mugs and cups: place these on the tip-up
**
compartments
• Long sharp knives and serving utensils: place these on
the tip-up compartments
In order to make it easier to arrange the crockery, the upper
rack may be moved to a higher or lower level.
The height of the upper rack should ideally be adjusted
WHEN THE RACK IS EMPTY.
Never lift or lower the rack on one side only.
1
2
3
4
16
*
into two separate pieces: pull out
.
**
.
Open the left and right guide rail stops
and pull out the rack; position it higher
or lower as required, slide it along the
guide rails until the front wheels are in
place and close the stops (see figure).
*
,
stems into the slits.
• Wooden items, objects with wooden or horn handles or
glued-on parts.
• Items made from aluminium, copper, brass, pewter or tin.
• Items made from plastic that is not heat-resistant.
• Antique or hand-painted porcelain.
• Antique silver. Silver that is not antique may, however, be
washed in the dishwasher using a delicate wash cycle,
provided that it does not come into contact with other
metals.
 We recommend the use of crockery which is dishwasher
safe.
To wash the upper and lower rack handles: remove the two
fastening plugs, lift out the handles and rinse them under
running water, then fasten them to the rack using the same
plugs.
*
Only available in selected models.
**
The number and position may vary.
If the rack is equipped with the
*
click clack handles (see figure),
pull them upwards or
downwards to adjust the height.
**
These special tip-up compartments
can be used to arrange mugs and
cups. Spoons, forks and knives
should be placed in the slots
provided. Stemmed glasses can
be hooked on by threading the
*