Loading The Racks; Cleaning And Maintenance - Indesit D2F HK26 Kurzanleitung

OPTIONS AND FUNCTIONS
OPTIONS can be selected directly by pressing the corresponding button (see CONTROL PANEL). If an option is not compatible with the selected
program (see PROGRAMS TABLE), the corresponding LED flashes rapidly 3 times. The option will not be enabled.
-
PUSH&GO
Push&Go button is an easily distinguishable button that
allows you direct access to the Push&Go program, a wash and dry cycle
that ensures great cleaning performance in a short time. You don't have to
worry which program to choose, Push&Go cycle will do the work for you.
To select Push&Go program, switch on appliance, press only Push&GO
button for 3 seconds.

LOADING THE RACKS

UPPER RACK
(loading example for the
upper rack)
Load delicate and light
dishes: glasses, cups, saucers,
low salad bowls.

CLEANING AND MAINTENANCE

CLEANING THE FILTER ASSEMBLY
2
1
A
In case you find foreign objects (such as broken glass, porcelain, bones, fruit seeds
etc.) please remove them carefully.
NEVER REMOVE the wash-cycle pump protection (black detail) (Fig 4).
TROUBLESHOOTING
PROBLEMS POSSIBLE CAUSES
No water in the water supply or the tap is closed.
The dishwasher
does not fill the
The inlet hose is bent.
water.
All LEDs are
The sieve in the water inlet hose is clogged; it is
blinking rapidly.
necessary to clean it.
Drain hose positioned too low or siphoning into
Dishwasher finishes
home sewage system.
the cycle prema-
turely.
Air in water supply.
Policies, standard documentation, ordering of spare parts and additional product information can be found by:
• Using QR code on your product.
• Visiting our website docs.indesit.eu and parts-selfservice.whirlpool.com
• Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When contacting our After-
sales Service, please state the codes provided on your product's identification plate.
The model information can be retrieved using the QR-Code reported in the energy label. The label also includes the model
identifier that can be used to consult the portal of the registry at https://eprel.ec.europa.eu.
2
LOWER RACK
(loading example for the
lower rack)
For pots, lids, plates, salad
bowls, cutlery etc.. Large
plates and lids should ide-
ally be placed at the sides
to avoid interferences with
the spray arm.
3
B
A
C
Please scan the QR code on your appliance in order to have more detailed information
DELAY - It is possible to delay the start time of the program by 2, 4 or 8
hours.
The DELAY function cannot be set once a program has been started.
CUTLERY BASKET
FOLDABLE
FLAPS The basket is equipped with top grilles for improved cutlery arrangement.
WITH AD-
The cutlery basket should be positioned only at the front of the lower rack.
JUSTABLE
POSITION
Knives and other utensils with sharp edges must be placed in the
cutlery basket with the points facing downwards or they must be po-
sitioned horizontally in the tip-up compartments on the upper rack.
CLEANING THE SPRAY ARMS
4
To remove the upper spray arm,
turn the plastic locking ring in a
clockwise direction.
Please scan the QR code on your appliance in order to have more detailed information
SOLUTIONS
Make sure there is water in the water supply or the tap running.
Make sure the inlet hose is not bent (see INSTALLATION) reprogram the dishwasher and
reboot.
After having carried out the verification and cleaning, turn off and turn on the dishwasher
and restart a new program.
Check if end of drain hose is placed at correct height (see INSTALLATION). Check for siphoning
into home sewage system, install air admittance valve if necessary.
Check water supply for leaks or other issues letting air inside.
CAPACITY: 14 standard place-settings
More information in the Daily Reference Guide on website.
The lower spray arm may
be removed by pulling it
upwards.
IEC 436
:
400011652237C
01/2023 dk - Xerox Fabriano