Werbung
Verfügbare Sprachen
Verfügbare Sprachen
5
Start-up
5.1
Pairing
Please read this entire section before starting
the pairing procedure.
First set up your Homematic IP Access Point via
the Homematic IP app to enable operation of
other Homematic IP devices in your system. For
further information, please refer to the Access
Point operating manual.
During pairing, please make sure you maintain a
distance of at least one metre between the
Homematic IP Access Point and the smoke de-
tector to avoid interference with the wireless sig-
nal.
To integrate the smoke detector into your system and en-
able it to communicate with other Homematic IP devices,
you must first teach-in the device to your Homematic IP
Access Point.
•
Open the Homematic IP app on your smart-
phone.
Select "Add device".
•
•
Twist the smoke detector (B) in a clockwise direc-
tion into the ceiling bracket (A) , until it clicks into
place (see figures 4a and 4b).
•
The pairing mode is active for 3 minutes.
Start-up
41
Werbung
