Leica RANGEMASTER CRF R Kurzanleitung Seite 20

DISTANCE MEASUREMENT MADE EASY
▸
Press the main button briefly
▸
Aim the target mark at the object
▸
Press the main button again
• The target mark disappears briefly and the measured value is displayed.
• Pressing the main button at any time while the target mark is lit will start a
new measurement.
will appear in the following scenarios:
- - -
– Distance to the object is less than 10 meters / 11 yards
– Range capability is exceeded
– Object is not sufficiently reflective
SCAN MODE (OBJECT TRACKING)
6 1
▸
Press the main button briefly
▸
Aim at the object while target mark is lit
▸
Press and hold the main button for approx. 2.5 seconds
9 8
6 3
7 2