Electrolux ERN22410 Benutzerinformation Seite 25

Ventilation requirements
The airflow behind the appliance must be
sufficient.
min.
200 cm
Installing the appliance
Caution! Make sure that the mains
cable can move freely.
Do the following steps:
1. Install the appliance in the niche.
Push the appliance in the direction of
the arrows (1) until the upper gap cover
stops against the kitchen furniture.
Make sure that the distance between
the appliance and the cupboard front-
edge is 44 mm.
Push the appliance in the direction of
the arrows (2) against the cupboard on
the opposite side of the hinge. Make
sure that the clearance between the ap-
pliance and the cupboard is 4 mm.
2
min.
200 cm
2
2
1
2. Adjust the appliance in the niche.
The lower hinge cover (in the accesso-
ries bag) makes sure that the distance
between the appliance and the kitchen
furniture is correct.
Open the door. Put the lower hinge cov-
er in position.
4mm
44mm
3. Attach the appliance to the niche with 4
screws.
4. Push the sealing strip between the ap-
pliance and the adjacent cabinet.
electrolux 25
I