cecotec WINDOWCLIMA 9000 INVERTER Bedienungsanleitung Seite 34

ENGLISH
13. Fan speed
14. FOLLOW ME function
15. Fresh air function
16. Automatic oscillation (SWING)
17. Child lock function
18. SLEEP function
Remote control operation
Fig. 5
1. Power button: press this button to switch on/off the appliance.
Mode button: press this button to select the operation mode in the order below: Auto→
2.
Cooling→ Dehumidification→ Heating→ Fan (some models do not feature the Heating
mode).
3. Increase/decrease buttons: press these buttons to increase or decrease the temperature
in the Auto mode, Cooling and Dehumidification modes, and to increase or decrease the
set timer hours.
4. Fan speed button: press this button to adjust the fan speed. You can choose from 7
preset speeds in addition to the automatic speed.
SWING function (oscillation) button: press this button to activate or deactivate the air
5.
direction flap. This function is compatible with all modes.
6. SLEEP function button: press this button to activate this function. Once activated, the
corresponding indicator light will flash 5 times and the brightness of the display will
decrease by 50%. The SLEEP function is only compatible with the Cooling and Heating
modes (if the model is equipped with the latter).
7. Timer button: press this button to set the automatic switch-off time when the appliance
is on, or to set the automatic switch-on time when the appliance is in standby mode.
Press the increase/decrease buttons to set the desired on or off time. Each time you press
one of the buttons, the time will increase or decrease by half an hour between 0 and 10
hours, and by one hour between 10 and 24 hours. Press and hold either button and the
time will increase or decrease continuously.
FOLLOW ME function button: press this button to activate or deactivate the function.
8.
The FOLLOW ME function can only be activated in Cooling and Heating modes using the
remote control. When the air conditioner is in operation, press this button on the remote
control to activate the FOLLOW ME function. The corresponding indicator light will light
up both on the remote control and on the air conditioner's display. The selected operating
mode does not change. This function allows the remote control to detect the temperature
at your current location and send this signal to the air conditioner every 3 minutes to
optimise the temperature around you and therefore ensure comfort.
LED display on/off button: press this button to switch on/off the appliance's LED display
9.
on the front panel.
66
WINDOWCLIMA 9000 INVERTER
10. Turbo function button: press this button to activate or deactivate the Turbo function. The
internal fan of the air conditioner will run at the highest speed for 30 minutes. After this
time, the fan speed will be reset to the previous setting. This function is only compatible
with the Cooling mode.
11. MY MODE function button: press this button to activate the MY MODE function.
Once activated, the appliance will operate in Automatic mode (AUTO) and at a preset
temperature of 26 °C.
12. MUTE function button: press this button to activate or deactivate the MUTE function.
The indoor fan of the air conditioner will run at the lowest speed, reducing the sound level
to a minimum for quieter operation. To deactivate this function, press any button and the
fan speed will be reset to the previous setting.
13. Self-cleaning function button: switch off the appliance and press this button to activate
the self-cleaning function. Once activated, "SC" will appear on the display and the indoor
fan will run at the lowest speed for 30 minutes.
14. Child lock function button: press the fan speed and timer buttons on the remote control
at the same time to activate or deactivate the child lock function.
Modes
Automatic mode (AUTO)
- Press the mode button to select the Automatic mode. Once selected, the corresponding
indicator light will light up on the front panel display.
- Under the Automatic mode, the appliance will automatically select the most suitable
settings or operating mode according to the room temperature.
- The Cooling mode is activated when the room temperature is above 27 ºC. The preset
temperature will be 24 ºC, and the fan speed will be automatic.
- The Dehumidification mode is activated when the room temperature is between 24 and 27
ºC, and the preset fan speed will be low.
- The Fan mode is activated when the room temperature is between 20 and 24 ºC, and the
preset fan speed will be medium.
- The Heating mode is activated when the room temperature is below 20 ºC. The preset
temperature will be 24 ºC, and the fan speed will be automatic.
- During operation, you can adjust the fan speed. The next time you activate the Automatic
mode, the fan speed will be reset to the default settings.
- The FOLLOW ME, MUTE and Self-cleaning functions are compatible with the Automatic
mode.
Cooling (COOL) and Heating (HEAT) modes
- Press the mode button to select the Cooling or Heating mode. You can do this while the
timer is running. Once selected, the corresponding indicator light will light up on the front
panel display.
ENGLISH
67
WINDOWCLIMA 9000 INVERTER