★Clear off the dusts accumulated on the rear panel and side plates of the refrigerator often.
★After using detergent, be sure to rinse it with clean water, and then wipe it dry.
Do not use bristle brush, steel wire brush, detergent, soap powder, alkaline detergent, benzene, gasoline, acid, hot water
and other corrosive or soluble items to cleanse the cabinet surface, door gasket, plastic decorative parts, etc., so as to
avoid damage.
★Carefully wipe dry the door gasket, clean the groove using a wooden chopstick wrapped with cotton string. After the cleaning,
fix the four corners of the door gasket first, and then embed it segment by segment into the door groove.
★This appliance is designed with automatic defrosting function, thus no need to defrost it manually.
★Replacement of LED lamp.The LED lamp is used by the refrigerator for lighting, which features low energy consumption and
long service life. In case of any abnormality, please contact the after-sales personnel for visiting service.
Interruption of use
★In case of power interruption or the planned power outage, try to open the refrigerator door as less as possible, and do not put
new food into the refrigerator. If you get the power outage notice in advance, do not add more foods, and set the freezer at
the fast-freezing mode before power cut. Also, you can make some ice cubes in advance, and put them on the upper part of the
fresh food compartment after power failure for urgent needs.
★In the event of an extended non-running of the refrigerator, be sure to wipe clean the internal and external surfaces and
accessories of the refrigerator, leave the refrigerator door with proper clearance, and place the refrigerator in a dry and
ventilated place to avoid bad smell.
Once the refrigerator is put into use, you'd better use it continuously. Do not stop the refrigerator under
normal circumstance, lest affect its service life.
Safety-check after maintenance
Is the power cord broken or damaged?
Is the power plug firmly inserted into the socket?
Is the power plug abnormally overheated?
Note: Electric shock and fire accident may be caused in case the power cord and plug are damaged or stained by dust. If
any abnormality, please unplug the power plug and get in contact with the vendor.
How to disassemble the parts.
★ Fridge or freezer door bottle shelf:
Hold the bottle shelf with both hands, and then push it up.
★Fridge shelf:
Hold one end of the shelf, and lift it up while pulling it outwards.
When you don't use the refrigerator for a long time
When the refrigerator is not to be used for more than one week or it is to be moved, wash it clean
withwater, and keep it dry. Remove the foods inside and unplug its power plug.
Changing the lamp
The LED lamp is used by the refrigerator for lighting, which features low energy consumption and long service life. In case
of any abnormality, please contact the after-sales personnel for visiting service.The lamps can only be replaced by the
manufacturer together with a part of the appliance.
Lamp type:LED light.
Energy efficiency level: G
Simple fault analysis and elimination
Regarding the following small faults, not every failure needs to be fixed by the technical service personnel; you can try to
solve the problem.
Case
•
Completely
not refrigerating
•Is refrigerator stable?
•Does refrigerator contact the wall?
•
Abnormal noise
Inspection
•Is power plug off?
•Are breakers and fuses broken?
•No electricity or line trip?
EN
•Re-plug
•Opening the door and checking whether the lamp is
lit.
•Adjusting refrigerator's leveling feet.
•Off the wall.
Solutions