PeakTech P2170 Bedienungsanleitung Seite 63

Note:
The phase angle θ will be shown on secondary display only in
Auto-LCR mode. During Auto-R mode or DCR mode, the
secondary parameter is not available.
9. To use Adapter
WARNING:
1. Please use an AC power adapter with the specifications
below, using other AC power adapter may damage your
instrument.
2. The AC power adapter can only be used indoors.
3. Please plug the AC power cord into an electrical outlet first
and then firmly insert DC plug into DC input end in the right
of the meter. When unplugged, firstly pull out the DC plug
perpendicular to DC input end and then unplug the AC
plug from the electrical outlet.
4. In use, it is a normal phenomenon that the AC power
adapter will be hot.
5. Do not demolish the AC power adapter. Otherwise, it may
be dangerous.
6. Do not use the AC power adapter in a high temperature or
wet place.
7. Please make the AC power adapter avoid a strong bump.
8. It is normal when the AC power adapter make some noise
in use.
Connecting the power adapter:
1. Connect the AC power cord to the AC/DC converter.
2. Plug the AC power cord into an electrical outlet (100V-
240V).
3. Plug the DC power plug of the converter into DC power
socket of the meter.
-62-