Danfoss A1-A5 Installationshandbuch Seite 9

VLT Frequency Converters, 0.25–90 kW
Installation Guide
Before activating the fire/emergency mode, ensure that all relevant parameters for the motor and application are configured correctly.
Danfoss recommends running the application from minimum to maximum speed and then bringing the application to a complete stop
to verify that it functions correctly without triggering any warnings or alarms on the local control panel. Failure to complete this step
before enabling the fire/emergency mode can result in loss of warranty. For more instructions on configuring the fire/emergency mode,
see Parameter Group 24-** Application Functions 2 in the VLT programming guide, or contact your local Danfoss office.
Power Losses and Efficiency
1.9
For power loss data including part load losses, see https://ecosmart.mydrive.danfoss.com.
Danfoss A/S © 2024.10
Installation
AN41701953385301-000201 / 130R1261 | 9