Werbung
Verfügbare Sprachen
Verfügbare Sprachen
m ATTENTION
All blades (7) must always be changed at the same
time. The changing of individual blades (7) is not per-
mitted.
If the Phillips screws (8) are damaged or can no
longer be tightened, these must also be replaced.
New screws are included with the replacement
blades.
• To replace the blades (7), place the robotic lawn-
mower (1) on a workbench with the underside fac-
ing upwards. (We recommend a soft base to avoid
damage to the housing).
• Loosen the Phillips screw (8) with the help of a
Phillips screwdriver (not included in the scope of
delivery).
• Remove the old blade (7).
• Fit the new blade (7) and fasten it with a new screw
(8).
• Check that the blade (7) can move.
If this is not the case, loosen the screw (8) a little.
• Carry out this operation on all three blades (7).
13.2 Software update (Fig. 26)
m NOTE The robot must be connected to the
WiFi in order to perform an automatic software
update via the app.
Connect your robot to your WiFi.
The software can be updated as soon as a new ver-
sion is available. (The latest software version can be
found on our homepage.
The software can be installed via USB or the app.
The software for USB transmission can be download-
ed from our homepage www.scheppach.com.
13.2.1 Software update via USB
• Look for the latest software version on our home-
page.
• Download this to an empty FAT32 formatted disk.
• Insert the data carrier into the USB drive (Fig. 26).
• Switch on the mower by pressing the
("POWER ON/OFF" button).
• The update starts automatically.
• Wait until "OK" appears on the display and then re-
move the data carrier.
m NOTE
The operating manual supplied with your robotic
lawnmower (1) is based on the software version at
the time of production of the mower.
Some new or changed features and functions may
not be included in the operating manual.
You can find the latest version of the software in the
app or at www.scheppach.com.
Service information
With this product, it is necessary to note that the fol-
lowing parts are subject to natural or usage-related
wear, or that the following parts are required as con-
sumables.
Wearing parts*: Blade (7), screws (8), boundary wire
(11), wire pegs (12).
* may not be included in the scope of delivery!
Spare parts and accessories can be obtained from
our Service Centre. To do this, scan the QR code on
the front page.
Article number(s) for wear parts:
Pos. 7
Pos. 8
Pos. 11 Boundary wire
Pos. 12 Wire pegs
14. Disposal and recycling
Notes for packaging
Notes on the electrical and electronic equipment
act (ElektroG)
• Used batteries or rechargeable batteries that are
not installed permanently in the old device must be
removed non-destructively before disposal! Their
disposal is regulated by the battery act.
• Owners or users of electrical and electronic devic-
es are legally obliged to return them after use.
button
• The end user is responsible for deleting their per-
sonal data from the old device being disposed of!
• The symbol of the crossed-out dustbin means that
waste electrical and electronic equipment must not
be disposed of with household waste.
• Waste electrical and electronic equipment can be
handed in free of charge at the following places:
- Public disposal or collection points (e.g. munici-
pal works yards)
- Points of sale of electrical appliances (stationary
and online), provided that dealers are obliged to
take them back or offer to do so voluntarily.
www.scheppach.com
Blade
7913001601
Screws
3913001001
7913001702
7913001701
The packaging materials are
recyclable. Please dispose of
packaging in an environmen-
tally friendly manner.
Waste electrical and electronic equip-
ment does not belong in household
waste, but must be collected and dis-
posed of separately!
GB | 33
Werbung
