Sungrow SG30CX Kurzanleitung Zur Installation Seite 2

EN
• Contents may be periodically updated or revised due to product development
without notice. In no case shall this guide substitute for the user manual or related notes on the device
Make sure to read over, fully understand and strictly fol ow the detailed instructions of the user manual and other related
regulations. Visit http://www sungrowpower com/, choose "PV Inverters" and search for the device model on the'Products"
page to view or obtain the user manual
All operations can be performed only by qualified personnel, that must be trained in the installation and commissioning of the
electrical system, as well as the dealing with hazards, have know edge of the manual and of the oca regulations and
directives
Before installation, check that the package contents are intact and complete against the packing list. Contact SUNGROW or
the distributor in case Of any damaged or missing components
The cable must be intact and well insulated Operation personnel must wear proper personal protective equipment (PPE) al
the time
• Any violation could result in personal death or injury or device damage, and will void the warranty
Safety
Please follow the safety instructions related to the PV strings and the utility grid Otherwise, SUNGROW shall not be held liable
for any damage caused
DANGER
Lethal voltage!
PV strings will produce e ectrical power when exposed to sunlight and can cause a lethal vo tage and an electric shock
Only qualified personnel can perform the wiring of the PV panels.
All e ectrical connections
Only with the permission of the utility grid, the inverter can be connected to the utility grid
Do not open the enclosure at any time. Unauthorized opening will void guarantee and warranty claims and in most cases
• terminate the operating license
When the enclosure lid is removed, live components can be touched which can result in death or serious injury due to
electric shock
WARNING
All the warning labels and nameplate on the inverter body must be clearly visible and not be removed, covered or pasted
A CAUTION
Risk of burns due to hot components!
Do not touch any hot parts (such as heat sinks) during operation. Only the DC switch can safely be touched at any time.
A NOTICE
Only qualified personnel can perform the country setting
Unauthorized alteration of the country setting may cause a breach of the type-certificate marking
must be in accordance with local and national
The information in this guide is subject to change
standards.
tab