Sungrow SG30CX Kurzanleitung Zur Installation Seite 13

Step3 Enter the identity verification
screen after the Bluetooth
established.
< BACK
IDENTITY VERIFICATION
"user"
A NOTICE
The user name is "user" and the initial password is "pwl 1 1 1" To ensure account security, please change the password
as soon as possible
Reset the protection parameters if the country setting is incorrect. Otherwise, fault may occur
n the European regions, such as Sweden, Norway, Hungary, Portugal, Romania, Greece, Ukraine etc. whose grid code
complies with EN50549, select the parameter EN50549
n the Brazilian region, set the country code to "Brazil" Selecting "Brazil _230" or "Brazil_240" wil cause setting failure
For SG30CX, set the grid code as EN50549 in the Ukraine region and app y manual settings for country code compliance.
•
Step5 If the inverter is initialized, the APP automatically
Date and time
Inverter state
PID function state
Power flow cha
Real-time power
Navigation bar
*Screenshots in this manual
connection is
2019/05/22 14:15
PIO w —g
30.726 w
Power
45.5 kW
are based on the Android
Step4 After finishing the settings, tap TUNR ON
DEVICE at the upper right corner and the device
will be initialized. The App will send start instructions
and the device will start and operate
1 (LV grid-connection)
turns to its home page.
SG50CX
SN:T2mgonn0003
Yield today Total yield
479.4 30,056.6
13m
Home page
system V2.1 6, and the actual interfaces
< BACK
TURN
INITIALIZE PROTECTION PAR
Use previous configuratiorn
Country/Region
Device A
or EN50549 2 (MV grid connection)
Power generation
Power curve
may differ.
ON DEVICE