Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ENGLISH
1. PARTS AND COMPONENTS
Fig. 1
1. Top cover
2. CO₂cartridge holder
3. Tap handle
4. Tap
5. Dispensing connector
6. Drain switch
7. Drip tray
8. CO₂ pressure knob
9. Temperature indicator lights/Temperature adjustment buttons
10. Cover opening button
11. Rear cover
12. Power cable and plug
13. Power switch
NOTE:
The graphics in this manual are schematic representations and may not exactly match the
device.
2. BEFORE USE
-
This appliance is packaged in a way as to protect it during transport. Take the appliance
out of its box and remove all packaging materials. You can keep the original box and
other packaging elements in a safe place to prevent damage to the appliance if you need
to transport it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
-
Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
Box content
-
Beer dispenser
-
Instruction manual
-
Do not remove the serial number of the appliance in order to keep a correct traceability of
it in case of assistance.
-
Before using the beer dispenser for the first time, it should be cleaned as detailed in the
Cleaning and Maintenance section.
46
BEERFLOW STEEL 5000
Werbung
