Step 2: Install Driver For Usb Connection; Step 3: Install Or Upgrade Type 2250/2270 Software - BRUEL & KJAER BZ-5503 Installations Anleitung

Chapter 1 – English
9) If you return to a selection screen, click X Exit. You must restart your
PC.
10) Remove the ENV DVD from the disk drive.
Measurement Partner Suite BZ-5503 software is now installed. You can
start the program by going to Start, Programs, Brüel & Kjær
Applications.

Step 2: Install Driver for USB Connection

A USB connection is necessary to: install new or upgrade software to
your analyzer, remotely control the analyzer, and/or synchronize data
via BZ-5503.
✐
Please note: You must have completed "Step 1: Install BZ-5503" before
connecting a hand-held analyzer to the PC.
1) Connect your hand-held analyzer to mains power and switch it on.
2) Connect your USB cable to the analyzer and to the PC. Use Mini USB
Cable AO-1476 or Micro USB Cable AO-1494, depending on the
hardware version of your hand-held analyzer.
3) Driver installation will run automatically. A pop-up screen will
appear with the message:
Type 2250/2270
installs.
When the pop-up disappears, the USB driver is installed.

Step 3: Install or Upgrade Type 2250/2270 Software

✐
Please note: You must have completed "Step 1: Install BZ-5503" and "Step 2:
Install Driver for USB Connection" to upgrade software.
The latest software package for your analyzer was installed to your PC
together with BZ-5503. To install/upgrade the software (plus any
licenses) to your hand-held analyzer, please consult BZ-5503's online
help.
Found New Hardware: Hand-held Analyzer
or
Installing device driver software
Measurement Partner Suite BZ-5503
Installation Manual
while the driver
7