Transport, Packaging And Storage; Commissioning; Installing Batteries - Refco Co2-Locator Bedienungsanleitung

5.

Transport, Packaging and Storage

The CO2-LOCATOR comes in a cardboard box to protect the parts.
The cardboard box protects against vibrations during transport and
handling. Always use the cardboard box to protect the leak detector
and accessories and secure it to the cargo area during transport.
The storage temperatures (Specification) must be maintained, and
the packaging must be closed. Do not expose to direct sun and to
high temperature within service cars.
6.

Commissioning

6.1

Installing Batteries

Loose the screw and remove the battery compartment door

located on the bottom of the Instrument as shown below.
Install Lithium-ion battery pack

Reinstall the battery cover by aligning it with the handle

When battery power is low, the red LED low battery indicator
Illuminates. The battery should be re-charged as quickly as possible.
8 Instruction Manual