Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
Inner walls
Remove all remains of food between door and MW oven with a damp cloth. This area
must be cleaned very thoroughly in order that the door can be closed properly. Remove all
grease stains with a damp cloth then wipe and dry the walls. Do not use cleaning agents
which are rough and abrasive because they will scratch and damage the surface of the
MW oven.
Remove the smells from the inside of the oven by placing a microwaveable dish with water
with lemon juice squeezed from one lemon with skin and letting the microwaves work on it.
Wipe and dry the inside of the oven afterwards.
ATTENTION: Never pour water into the MW oven!
Door
Door and door sealing must remain clean. Wash only with warm water with soap and then
dry thoroughly. Do not use any abrasive agents such as cleaning powders or metal or
plastic scrapers. Metal parts are best maintained by wiping them frequently with a damp
cloth.
Outer parts
Clean outer casing with a fine cloth with warm water, then dry it with a soft cloth.
Make sure that water does not get to the inner parts. If the supply cord gets dirty, wipe
it with clean cloth. Always make sure that the surface of the door sealing is clean.
Turning plate
Clean the glass plate in clean water. Remove the turning circle and clean it in hot water
with soap. It is also necessary to maintain the guiding are clean so that grease does not
prevent the wheels to turn. Otherwise, the noisiness of the oven might increase.
More extensive maintenance or maintenance requiring
intervention in the inner parts of the appliance must be
carried out by professional service! Failure to comply with the
instructions of the manufacturer will lead to expiration of the
right to repair!
The information regarding warranty and product repairs you can find
on the website www.eta.cz/servis-eu.
VII. ENVIRONMENTAL PROTECTION
If the dimensions allow, there are labels of materials used for production of packing,
components and accessories as well as their recycling on all parts. The symbols specified
on the product or in the accompanying documentation mean that the used electrical or
electronic products must not be disposed of together with municipal waste. For proper
disposal of the product, hand it over at special collection places where it will be received
free of charge. Suitable disposal of the product can help to maintain valuable natural
resources and to prevent possible negative impacts on the environment and human health,
which could be the possible consequences of improper waste disposal. Ask for more
details at the local authorities or at a collection site. Fines can be imposed for improper
disposal of this type of waste in agreement with the national regulations. If the appliance is
45 / 90
Werbung
