Werbung
Verfügbare Sprachen
Verfügbare Sprachen
V. CONTROL
This microwave oven incorporates a state-of-the-art electronic device to set the cooking
parameters to better satisfy your needs for your cooking.
– If MW oven does not work properly, disconnect it from electrical socket, wait 10 seconds,
and then re-connect it.
– If the appliance is running, the interior will be lighted.
– The door may be opened during the cooking process. The timer shall stop and the
appliance operation will be interrupted. To continue, press "Z".
– After the preset time of the selected function/programme expires, a sound signal will be
heard, and the appliance will switch to standby mode.
– The rotary plate may rotate in any direction.
– Microwave cooking, grilling, defrosting (def2) or a combined function – Each pressing of
"Z" button during this process shall extend the cooking time by 30 seconds. After cooking
is finished, a signal will sound five times, and the appliance shall switch to standby mode.
– If the door opens in standby mode or during the setting process, the introductory
information on the display will remain the same. It may be changed and set, but "Z" button
will not work.
1. SETTING THE CLOCK
Once the oven is connected to the electrical mains, "0:00" will appear on the display, and
an acoustic signal will sound. Then the appliance shall switch to idle.
1)
Press "H" in standby mode. "0" shall start blinking.
2)
Set the current hour (0-23) by rotating "K" knob.
3)
Confirm by pressing "H" – minute digits shall start blinking.
4)
Set minutes in the interval 0-59 by rotating "K" knob.
5)
Press "H" to finish. ":" will start blinking.
– If the clock is not set, it will not work after switching on.
– If you press "ST" button during setting the clock, the oven shall automatically return to
the previous mode.
– To change the clock setting, please apply the same procedure.
2. FAST COOKING
a) Press "Z" button in idle condition of the oven to start food cooking with full microwave
output for 30 seconds. Each subsequent pressing of "Z" button will extend the cooking time
by 30 seconds.
b) In idle condition, select the cooking time by rotating "K" to the left, and confirm by pressing
"Z" button to start cooking with 100 % output.
3. MICROWAVE COOKING
1)
Use "MG" to select the microwave output (5 levels are available for setting – see the
table below).
2)
Press "Z" button to confirm.
Notes
Notes
41 / 90
EN
Werbung
