During Use; Start The Unit; Pressure Gauge Backlight; Cylinder Pressure - Interspiro Pac Bedienungsanleitung

During use

Start the unit

Pressurize the SCBA to start the unit.
When pressurizing to start a device in a stationary state e.g. on a table, the
PAC unit needs to be moved to start.

Pressure gauge backlight

The pressure gauge backlight is illuminated for 3 seconds when pushing the
Mode-button.
3
The backlight color indicates the cylinder pressure.
Green = Cylinder pressure 100 - 25%
Red = Cylinder pressure is 25% or below

Cylinder pressure

The cylinder pressure is shown by the right and left LED lights.
When the cylinder pressure are between 100 - 25% capacity, it is shown by
green LED lights.
10
PAC
sec
sek