Alarms - Interspiro Pac Bedienungsanleitung

PAC

Alarms

Motion alarm
If no movement is detected during 20 seconds, the pre-alert activates with a
beeping sound once per second. Move the unit to deactivate the pre-alert. If
the pre-alert is not deactivated within 10 seconds, the full alarm will start with
the LEDs flashing and a high pitch alarm sound.
The time to pre-alarm is by default 20 seconds. The time to pre-alarm can be
customized on request.
Activate motion alarm manually
• Press the alarm button to start the alarm manually.
Cancel motion alarm
• Version with Tally key: Insert the Tally key and then remove it again.
• Version without tally key: Press the mode button and the alarm button at the
same time.
12