Checking Gas Flow Rate On Tig Welding Torches With Euro Torch Connector; Preparations; Checking The Gas Flow Rate - Fronius Testbox - Torch Flow Rate Bedienungsanleitung

Checking gas flow rate on TIG welding torches with
Euro torch connector
Safety

Preparations

Checking the gas
flow rate
WARNING! Work that is carried out incorrectly can cause serious injury and dam-
age. The work described below must only be carried out by Fronius-trained qual-
ified personnel!
(1)
NOTE! During the test:
- lay the adapter hosepack in a straight line from the testbox to the welding
torch
- place the welding torch on a suitable base so it is in a straight line
Place the O-ring (2) on the adapter (1)
1
as shown
(2)
Screw the F-ZA / TIG-EC attachment
2
(3) onto the adapter
Start the testbox
3
Turn the welding torch category switch
4
to the - TIG - position
(3)
73