Werbung
Verfügbare Sprachen
Verfügbare Sprachen
General
Device concept
Proper use
The Torch Flow Rate testbox is intended exclusively for testing the gas flow rate of Fronius
welding torches.
Utilisation for any other purpose, or in any other manner, shall be deemed to be not in ac-
cordance with the intended purpose.
The manufacturer shall not be held liable for any damages arising from such usage.
Proper use also includes
-
-
-
Warning notices
The device is fitted with safety symbols and a rating plate. The safety symbols and rating
on the device
plate must not be removed or painted over. The symbols warn against operating the equip-
ment incorrectly, as this may result in serious injury and damage.
www.fronius.com
50/60 Hz
carefully reading these operating instructions
following all the instructions and safety rules in these operating instructions
carrying out all the specified inspection and servicing work
Testbox - Torch Flow Rate
Mod.:
Part No. :
A-4600 Wels
Ser. No.:
EN 61010-1
U
P
I
1
1
1~
115/230 VAC
0,3A
10
L x W x H
330mmx235mmx220mm
2011
The Torch Flow Rate testbox is used to car-
ry out a gas flow test on the following Froni-
us welding torches
-
MIG/MAG welding torches
-
TIG welding torches
-
Plasma torches
4,078,016
max in
0,8 A
bar
IP 20
Testbox - Torch Flow Rate
Mod.:
Part No. :
4,078,016
A-4600 Wels
www.fronius.com
Ser. No.:
EN 61010-1
U
I
P
1
1
max in
1~
115/230 VAC
0,3A
10
0,8 A
50/60 Hz
bar
L x W x H
IP 20
330mmx235mmx220mm
2011
51
Werbung
