Werbung
3.2 Install LT01 Box
After determining the installation location, first tear
off the protective film of the electrostatic sticker
and stick it on the installation location. Then tear off
the other protective film of the electrostatic sticker.
Tear off the 3M adhesive protective film on the back
of LT01 Box, and then paste it on the electrostatic
sticker. The installation is complete.
①
When installing, please be careful not to be too
far away from the Vantrue dash cam;
②
Do not install it in a position that blocks the
driver's sight;
③
The installation position can be as high as
possible. After the installation is completed, the
device can be removed by pulling down the LT01
Box.
- 9 -
EN
Werbung
