Herunterladen Diese Seite drucken

Grundig CMS 4200 Bedienungsanleitung Seite 44

Vorschau ausblenden Andere Handbücher für CMS 4200:

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

CONNECTIONS _________________________
Connect to Speakers
Note:
• For optimal sound, use the supplied speakers
only. Connect only speakers with impedance
that is the same or higher than the supplied
speakers. Refer to the Specifications section
of this manual.
1. Loosen the left / right speakers connector.
2. Use the speaker cable (included) to connect
the speaker port on the left/right speaker.
• Golden harness cable connect to the "+" (red
connector) terminal
• Silver harness cable connect to "-" (black con-
nector) terminal
3. Screw the red (+) / black (-) connector to se-
cure the cable.
4. Connect the speakers to the SPEAKER OUT
(R/L) sockets on the rear of the main unit.
Connect to Headphone
• Plug a headphone into the
cket. When you connect headphones to hear
the sound from the speakers.
• Please note that the Hearing Safety.
Use the LINE IN/AUX Socket
• Use a RCA to 3.5mm audio cable (included) to
connect the TV's audio output sockets to the
AUX IN or LINE IN socket on the unit.
• Use a RCA to RCA audio cable (not included)
to connect the TV's audio output sockets to the
AUX IN (R/L) socket on the unit.
• Use a 3.5mm to 3.5mm audio cable (not in-
cluded) to connect the TV's or external audio
device headphone socket to the LINE IN socket
on the unit.
44 ENGLISH
Connect the (FM) Aerial
• Connect one end of the (FM) aerial (included)
IMPORTANT:
• You may need to adjust the position of the
• Never leave the aerial where it can be pulled
Connect Power
Risk of product damage!
• Ensure that the power supply voltage corres-
• Before connecting the AC power cord, ensure
• Connect the mains cable to the AC~ socket
(Headphone) so-
to the ANT. socket at the rear of the unit. Then
position the aerial to obtain optimum recep-
tion.
aerial when tuning the radio to receive the
strongest signal.
by pulled by young children.
ponds to the voltage printed on the back or the
underside of the unit.
you have completed all other connections.
of the main unit and then into a mains socket.

Werbung

loading