PREPARATIONS ________________________
Prepare the Remote Control
The provided Remote Control allows the unit to
be operated from a distance.
• Even if the Remote Control is operated within
the effective range 19.7 feet (6m), remote
control operation may be impossible if there
are any obstacles between the unit and the
remote control.
• If the Remote Control is operated near other
products which generate infrared rays, or if
other remote control devices using infra-red
rays are used near the unit, it may operate in-
correctly. Conversely, the other products may
operate incorrectly.
Replace the Remote Control
Battery
1. Press and slide the back cover to open the
battery compartment of the remote control.
2. Insert two AAA size batteries. Make sure the
(+) and (–)ends of the batteries match the (+)
and (–) ends indicated in the battery compart-
ment.
3. Close the battery compartment cover.
Precautions Concerning
Batteries
• Be sure to insert the batteries with correct po-
sitive " " and negative " " polarities.
• Use batteries of the same type. Never use dif-
ferent types of batteries together.
• Either rechargeable or non-rechargeable bat-
teries can be used. Refer to the precautions
on their labels.
• Be aware of your fingernails when removing
the battery cover and the battery.
• Do not drop the remote control.
• Do not allow anything to impact the remote
control.
• Do not spill water or any liquid on the remote
control.
• Do not place the remote control on a wet ob-
ject.
• Do not place the remote control under direct
sunlight or near sources of excessive heat.
• Remove the battery from the remote control
when not in use for a long period of time, as
corrosion or battery leakage may occur and
result in physical injury, and/or property da-
mage, and/or fire.
• Do not use any batteries other than those spe-
cified.
• Do not mix new batteries with old ones.
• Never recharge a battery unless it is confirmed
to be a rechargeable type.
ENGLISH
43