AENO RC5S Schnellstartanleitung Seite 15

3. Clean the HEPA filter and pre-filter with a dry brush or cloth.
4. Remove and rinse the side brushes and fabric covers with warm water.
5. Remove hair and debris from the roller brush using the vacuum cleaner care
brush (included).
Dry the component parts away from heaters. Make sure all the parts are
completely dry before reinstalling.
Troubleshooting
 The vacuum cleaner won't charge. Possible causes: the socket is faulty; the
charging base is not plugged in; the contacts on the base and/or vacuum
cleaner are dirty. Solution: check the socket by connecting another device
to it, if necessary, connect the power cord to a serviceable socket; check the
connection of the power cord to the base and to the mains; wipe the
contacts with a dry soft cloth.
 The vacuum cleaner returns to the base until cleaning is complete.
Possible cause: the battery charge is less than 20 %. Solution: charge the
vacuum cleaner.
 The suction power has decreased. Possible cause: container is full; roller
brush is clogged. Solution: clean the container and/or roller brush.
WARNING! If none of the suggested methods have solved the problem,
contact your supplier or an authorized service centre. Do not disassemble the
device or attempt to repair it yourself.
ASBISC reserves the right to modify the device and to make changes and additions to this
document without prior notice to users. The warranty period and service life is 2 years from the
date of retail sale of the product. For date of manufacture see package. Manufacturer's information:
ASBISC Enterprises PLC, Iapetou, 1, Agios Athanasios, 4101, Limassol, Cyprus. Made in China. All
trademarks and brands mentioned herein are the property of their respective owners. Up-to-date
information and a detailed description of the device, as well as connection instructions, certificates,
information about companies that accept quality claims and warranties, are available for download
at aeno.com/documents.
aeno.com/documents 15