H OW TO U S E YO U R T R I N I T Y + D E V I C E ( C O N T I N U E D )
4) BEGIN TREATMENT
You can also refer to your Quick Start guide for basic glides treatment for the neck, cheeks,
and forehead.
• Place the Trinity+ device in direct contact with the treatment area.
• Always keep both spheres in contact with the skin during treatment to keep
microcurrent flowing.
• Using light to medium pressure, begin treatment.
• The device emits a dual tone beep every seven (7) seconds to indicate when to move to
the next treatment area.
IMPORTANT: If you feel the electrical current and / or experience a tingling sensation on
your skin, do the following:
• Add more NuFACE Microcurrent Activator to the area you are treating. The device will NOT
contract the muscles when used as instructed.
• Lower the intensity on the device. Lowering the intensity may also reduce or eliminate this
sensation.
5) FINISH TREATMENT
• After treatment is complete, massage remaining NuFACE Microcurrent Activator into skin.
• Turn OFF the Trinity+ device after treatment.
• A descending audible beep is emitted notifying you that your device is turning OFF.
The Trinity+ device will automatically shut off after 20 minutes of use.
Go to the section 'CARING FOR YOUR TRINITY+ DEVICE' for instructions on cleaning and
maintaining your device.
T R E AT M E N T F R EQ U E N CY
• Use 5 minutes a day.
• For the first 60 days, use 5 days per week.
• After 60 days, use 2-3 times per week for maintenance.
• Allow 24 hours between treatment sessions.
For more advanced treatment options and holds, download the NuFACE App, or visit our website
at www.NuFACE.com.
R E S U LT S
Results may vary based on skin type and skin condition. Best results are achieved with regular use.
N U FAC E A P P
Download the NuFACE APP for additional how-to instructions, and customized treatment
options.
• You can download it from the App store or the Google Play Store.
• To pair your device, in the App, click on 'Add Device' and follow the on-screen instructions
to connect.
• The NuFACE app is available in many countries around the world.
CA R I N G FO R YO U R T R I N I T Y + D E V I C E
Cleaning:
• Slightly dampen a soft, lint-free cloth with water or rubbing alcohol to clean your device after
every treatment.
• DO NOT submerge your device in water at any time.
Charging:
• Before first use, charge your Trinity+ device for ten (10) hours or until all 3 LEDs are lit solid.
• The Trinity+ device will NOT turn on when it is charging.
• For continued optimal battery life, it is recommended to charge your Trinity+ device at least
once a week.
• A fully charged device should last for approximately 2 weeks of use based on daily usage
of 5 minutes.
8
NF_RestageTrinity_UserManual_Global_75113-1_051722.indd 9
NF_RestageTrinity_UserManual_Global_75113-1_051722.indd 9
CA R I N G FO R YO U R T R I N I T Y + D E V I C E ( C O N T I N U E D )
• Keep the product out of the reach of children when charging.
• Keep the product away from high temperature, open flame and water sources when charging
to prevent short circuiting or damaging the battery.
• Plug the charger into a wall outlet away from water, and within a location that can be accessed
and disconnected easily.
Battery:
For ideal battery life, we recommend charging your Trinity+ device when the low battery indicator
(1 LED light only) is displayed on your device.
Check Battery / Light Indicators:
To check your device battery level, hold the power button down on your device for
one (1) second. The battery level will be illuminated through the three (3) LEDs:
LED LIGHT INDICATOR
BATTERY POWER
NO LED Lights
No Battery Power
A full charge cycle of eight (8) hours is recommended before use.
1 LED Flashing
Critical Battery. Not enough charge to start a treatment.
1 LED
Low Battery
2 LEDs
Medium Battery
3 LEDs
Full Battery
Power Adapter:
• Only use the power adapter (marked NuFACE) provided with the Trinity+ device containing
voltage 5VAC 1A.
• Connect the power adapter in a location that can be easily accessed and disconnected from
the outlet.
• If your power adapter is damaged or missing, visit www.NuFACE.com to purchase a replacement.
Storage:
The Trinity+ device is intended to be stored and used at room temperature. Use caution prior
to using the device if it has been stored or not used for an extended period of time. Inspect the
device and do not use it if there are any signs of internal battery leaks.
Disposal:
IMPORTANT: If disposing the device, do not put into a fire. Dispose of the device and its
batteries per local regulations.
T RO U B L E S H O OT I N G
Device Not Turning On:
1) Check to see if your Trinity+ device is fully charged.
• If the device does not turn ON, the battery may be drained.
• A full charge cycle of ten (10) hours may be required for the device.
• For additional information go to the "BATTERY" section in this user guide.
2) Check to see if the attachment is completely secured to the Trinity+ device and fits securely
IMPORTANT: The Trinity+ device will NOT turn on if the attachment is not securely in place.
Resetting Your Device:
• To reset your device back to factory settings, place the Trinity+ device in the charging cradle.
• Hold down the power button for 10 seconds.
• The 1st and 3rd LEDs will blink three (3) times.
• Once the LEDs stop blinking you may start using your Trinity+ device.
IMPORTANT:
With a factory reset, you will need to redo your Bluetooth® pairing and settings.
DO NOT attempt to troubleshoot by disassembling the product as this will void the warranty and
may cause injury.
9
5/17/22 1:00 PM
5/17/22 1:00 PM