Nuface TRINITY+ Benutzerhandbuch Seite 5

P R ECAU T I O N S ( C O N T I N U E D )
The NuFACE Trinity+ Device is intended for cosmetic use on the face and neck as described. Any
consequence resulting from misuse, application to other parts of the body or face, connection to
improper voltage sources, dirty spheres, expired or non-NuFACE conductive alternative, or any
other improper application is neither the responsibility of NuFACE nor its affiliates.
The NuFACE® Trinity+ has been designed to provide freedom from unacceptable risk when used
under normal conditions and reasonably foreseeable hazards. In the event of complete loss of
treatment function, the Trinity+ does not pose a risk to the user.
N U FAC E M I C RO C U R R E N T AC T I VATO R
The essential first step to your microcurrent treatment to ensure optimal results.
• Always apply a mask-like layer of the NuFACE Microcurrent Activator in sections as you
treat with the Trinity+ device.
• Refer to packaging for use by date.
T R E AT M E N T A R E AS A N D T EC H N I Q U E
The instructions below are designed to provide users with the most effective results when
followed correctly.
T R E AT M E N T
• The Trinity+ device is designed to stimulate large surface areas of the face and neck, such as the
jawline, cheekbones, and forehead. Avoid using the device directly over the midline of the neck.
T EC H N I Q U E
• Using light to medium pressure, lift one side of the face and neck at a time using a gliding motion.
IMPORTANT: Always ensure that both spheres are in contact with the skin during treatment.
• Refer to your Quick Start Guide for basic glides treatment for the neck, cheeks, and forehead.
• For more advanced treatment options and holds, download the NuFACE App, or visit our website
at www.NuFACE.com.
B E FO R E U S I N G YO U R N E W D E V I C E
Follow these important steps before using your new device:
1) CHARGE YOUR DEVICE
IMPORTANT: Charge your Trinity+ device for ten (10) hours before the first use or until all
three (3) LED indicator lights are lit solid.
• Remove your Trinity+ device, charging cradle, and external power adapter from the box.
• Connect the external power adapter to the charging cradle and plug the adapter into the
wall outlet, keeping it away from any source of water.
• Place your Trinity+ device on the charging cradle.
• The lights will increasingly illuminate, indicating that your device is charging.
• Your device is fully charged when all the all the lights stay illuminated.
The Trinity+ device will NOT turn on when it is charging.
2) TEST YOUR SENSITIVITY
IMPORTANT: Test your skin to make sure you are not sensitive to the NuFACE Microcurrent
Activator.
• Rub a small amount of Microcurrent Activator on your forearm and leave for 15-30 minutes
before washing it off.
• If an allergic reaction (rash, redness, etc.) develops, immediately contact NuFACE for
recommendations on alternative NuFACE formulas. DO NOT continue application of the
Microcurrent Activator with the Trinity+ device until a resolution such as an alternate
Microcurrent Activator has been identified.
6
NF_RestageTrinity_UserManual_Global_75113-1_051722.indd 7 NF_RestageTrinity_UserManual_Global_75113-1_051722.indd 7
H OW TO U S E YO U R T R I N I T Y + D E V I C E
Get ready to Tone, Lift, and Contour.
The instructions below are designed to provide the most effective results when followed correctly.
1) CLEANSE YOUR FACE
• Cleanse your face and neck with an oil-free cleanser. Men should shave before treatment —
facial hair can interfere with the conductivity of the spheres.
Note: Any cream, lotion, self-tanner, and/or oil-based products on the skin can block the
microcurrent.
2) APPLY ACTIVATOR
IMPORTANT: Always apply a NuFACE Microcurrent Activator when using your Trinity+ device.
• Apply a mask-like layer of the NuFACE Microcurrent Activator section-by-section as you treat.
• Reapply activator if skin becomes dry during treatment in order to continue safely using device.
3) PREPARE YOUR DEVICE
• Remove your device from the charging cradle and turn it ON by pressing the ON/OFF button.
• An ascending audible beep is emitted, the energizing hum will begin, and the lights will illuminate
indicating that your device is ON.
• Adjust the intensity level to your comfort by pressing the ON/OFF button on the front of
your device.
• As you increase or decrease intensity, an audible beep is emitted, and the number of illuminated
lights will change.
The Trinity+ device will NOT turn on if the attachment is not securely in place.
T R I N I T Y + D E V I C E I N D I CATO RS
INTENSITY LEVEL INDICATOR LIGHT
Minimum Intensity First Light Illuminated
Medium Intensity First & Second
Light Illuminated
Maximum Intensity All (three) 3 Lights Illuminated
DEVICE AUDIBLE SOUND DEVICE INDICATION
Ascending Beeps & Hums Powered ON
Descending Beeps Powered OFF
Single Beep
Intensity Adjusted
Dual-Tone Beep End of Glide Interval
(Tone occurs only during treatment)
Low-Tone Beep Battery Needs To Be Charged
(Tone occurs only during treatment)
PRO TIP
During treatment, give stubborn areas an extra boost of NuFACE
microcurrent energy by turning ON the Boost button.
• The energizing hum will increase, indicating that the boost is ON.
• Boost will be active for 30 seconds or until the button is pressed
again, whichever comes first.
Boost
button
7
5/17/22 1:00 PM 5/17/22 1:00 PM