Charging The Trimmer; AcOperation; Using The Trimmer - Panasonic ER-GB60 Bedienungsanleitung

Chargingthetrimmer
• Make sure that the trimmer is turned off.
1
1
Connecttheapplianceplugto
theappliancesocket.
2
2
Plugintheadaptorintoa
householdoutlet.
• Check that the charge status lamp glows.
• Charging is completed after approx.
1 hour.
3
3
Disconnecttheadaptorwhenthechargestatus
lampstopsglowing.
• Recommended ambient temperature for charging is
0 – 35 °C. Battery performance may decrease under
extremely low or high temperatures, and the battery may
not be charged properly.
• A full charge supplies enough power for approximately
50 minutes of use.
The operating time may differ depending on the frequency
of use, the operating method and the ambient temperature.
• When charging the trimmer for the first time or when it has
not been in use for more than 6 months, the lamp on the
main body may not glow for a few minutes, or the operating
time may shorten. Please charge it for more than 8 hours in
such cases.
10

ACoperation

If you connect the AC adaptor to the trimmer in the same way as
for charging, and turn on the power, you can use it.
• If the remaining battery is too low, the blades may move slowly or
stop, even with the AC operation. In this case, charge the battery
for 1 minute or more.
• The battery will be discharged, even with the AC operation.
2
Usingthetrimmer
1
• Make sure that the trimmer is turned off.
• We recommend using the trimmer in an ambient temperature
range of 0 – 35 °C. If used outside this range, the appliance may
stop operating.
1
1
Mountthedesiredcombattachmentandadjust
thetrimmingheightasneeded.(Seepage11.)
• It can also be used without the comb attachment.
(Trimming height: approx. 0.5 mm)
• Actual hair length will be a little longer than the height you
set.
2
2
Pressthepowerswitchtoturnon
thepower.