Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Water Balance
Maintainthe spa water pH level between 7.2 and 7.8, total alkalinity between 80 and 120ppm and free chlorine
level between 3 to 5ppm. Use the *optionalTest Strips to test the spa water chemistry before each use of the
spa and continue to test the water no less than once a week.
The Test Strips can test the "Free Chlorine", "PH",and "Total Alkalinity" level at the same time:
1. Dip the entire strip into the water and remove immediately
2. Hold the strip levelfor 15 seconds. Do not shake excesswater from the strip
3. Compare the strip pad to the color chart on the packaging label. If necessary,adjust the chemical level in
the pool water
NOTE:
• LowpHwill damagethe spatub andpump.Damageresultingfromthe chemicalimbalancewill void the
warranty.
•
High pH (hard water) will result in white coagulationsinside the filter pump; which may lead to pump
damage
WATER
TREATMENT:
•
Bromeor chloreis highlyrecommended for goodwaterquality.
•
Please note that chlorine and bromine products should never be mixed. This is extremely dangerous. If you
usually use chlorine-basedproducts and you want to switch to bromine-basedproducts, or vice versa, it is
mandatory to completelychangethe spawater beforeany productchanges.
•
Do not over use the chemicals,otherwisethere will be strong chemical odor and potential hazardto your
skin.
18
Werbung
