Ausgangs-Kalibrierung - Soundlight Dmx Rdm Bedienungsanleitung

PID DCCA: OUTPUT
CALIBRATION

AUSGANGS-KALIBRIERUNG

This menu allows to set n individual calibration values
for outputs 1...n. Data entry uses hexadecimal number
format.
(shown: JESE GET/SET controller,
setting for 12-channel DMX Demux 3012C-EP)
GET entry values:
none
00 xx
SET entry values:
00 xx yy
FF FF yy
displays list of calibration factors
displays calibration factor for
slot xx (xx=01...nn)
Sets calibration factor yy for
slot xx (yy=00...FF; xx=01...nn)
Sets same calibration factor yy
for all outputs