SoundLight DMX RDM Bedienungsanleitung Seite 35
Inhaltsverzeichnis
FUNCTION C011
FUNCTION C012
This function sets the ramp for acceleration or deceleration of the stepper motor. 8 values must be
given to define the acceleration curve, with full speed = $FF and zero speed = $00. See example
for more details.
Calls:
GET <param = none> (no parameter needed)
Return: <param=Ramp [8 Bytes]>
SET <param=Ramp [8Bytes]>
Return:
Ramp = $00...$FF
ACCELERATION RAMP
DECELERATION RAMP
<param=none> (no parameter returned)
the value will be taken as speed factor
GET Mask
Ramp design
Inhaltsverzeichnis
